- Joined
- Feb 20, 2010
- Messages
- 2,818
- Points
- 48
https://mil.news.sina.com.cn/jssd/2019-02-07/doc-ihrfqzka4121820.shtml
F22被曝使用中国3D打印机所制部件 中国或对美禁售
F22被曝使用中国3D打印机所制部件 中国或对美禁售
410
如今美军隐身战机离不开中国制造了
3D打印的钛制金属零部件已首次安装在美军F-22与F-35B隐身战斗机上，而且从订货到交付至仓库仅用了3天时间，美国空军希望以此来降低战机的维护成本和维护时间。据美国“合众国际社”2日报道称，战机安装3D打印的零部件早已不是新鲜事，除美国外，英国和中国在该领域也有显著成果。而这次，尽管美军宣人员在发布照片时，对3D打印机的细节进行了模糊化处理，但还是没能逃过眼尖的中国网友，他们通过仔细对比后发现，美军此次使用的3D打印机，实际是中国制造的。
美军承认已广泛使用中国3D打印机
众所周知，3D打印技术如今方兴未艾，在很多十分重要的国防领域，比如战机发动机关键部件、战略导弹的一些特殊零件与宇宙飞船的重要组成部分，如今都可以使用3D打印机在最快时间内制造出来。那么，中国的3D打印技术怎么样呢？打个比方来说，就如同无人机一样，中国虽然是后来者，但却成为发展速度最快的国家。据悉，在了解到3D打印技术的广阔发展前景后，中国就投入了巨资进行开发，如今已成为这一领域的世界佼佼者。
美隐身战机未来将更依靠中国3D技术
这次已发现美国和英国的战机，都在使用中国制造的3D打印机——“梦想家”型的高精度双喷头3D打印机。驻扎在犹他州希尔空军基地的美空军第574军机维修中队，使用中国生产的3D打印机，为F-22战机打印了一个钛金属支架，全部过程只用了3天，从而让该战机可以缩短60~70天就能重新投入战斗；而美海军“黄蜂”号（LHD-1）两栖攻击舰上的维修人员，则为F-35B打印了一个塑料卡扣，成功让一架战机在1天内重返蓝天；而英国皇家空军的“狂风”GR4攻击机，造诣开始大批使用3D打印包括座舱无线电的防护罩、起落架防护装置以及进气道的支架组件等。由此可见，不知不觉间，美英等国早已在最先进的战机上开始使用中国制造的3D打印机制造所需关键部件。
歼-20使用3D打印的钛合金机框
不过，美军是不会允许直接在军中使用中国制造的装备的，比如早前从中国定制的美国国旗都被美军强制停止使用。这次也一样，使用中国制造的3D打印机的美军部队，刻意在关键部位模糊了所用3D打印机的商标，但还是被网友发现识别出来了，竟然是中国南方制造的。这家中国企业实力雄厚，在中国3D打印品牌评价推介活动中被评为“中国桌面级3D打印机推荐品牌”、“中国3D打印最具创新力企业”、“中国3D打印最具影响力国际品牌”，并获得“第四届中国创新创业大赛”第二名，是中国3D打印的领军企业。
预计美军在维修战机时就离不开中国3D了
分析认为，3D打印技术作为快速制造复杂特殊零部件的最新手段，已被广泛应用于更多的尖端领域，包括中国的歼-20战机，也早已开始利用这一技术制造很多很多关键结构件。这一技术不但可大幅节省制造成本，最重要的是可大幅减少制造时间，十分有利于战时快速修读作战飞机并让其迅速再次投入战斗。如今，在这方面中国已走在世界前列，就像无人机一样，成为中国新的出口拳头。同时，今后美英等国一定会在军中的一些核心领域大量应用3D技术，对此，中国是否考虑可将一些相关型号列入对美禁运之列？（作者署名：军评陈光文）
F22 is exposed to parts made in China's 3D printer. China or the US is banned.
F22 is exposed to parts made in China's 3D printer. China or the US is banned.
410
Nowadays, the US military stealth fighters cannot be separated from China. Nowadays, the US military stealth fighters cannot be separated from China.
3D printed titanium metal parts have been installed on the US F-22 and F-35B stealth fighters for the first time, and it took only three days from order to delivery to the warehouse. The US Air Force hopes to reduce the maintenance cost of the aircraft and Maintenance time. According to the US "United Press International" reported on the 2nd, the installation of 3D printed parts of the aircraft is not new. In addition to the United States, the United Kingdom and China have also made remarkable achievements in this field. This time, although the US military officers blurred the details of the 3D printer when they released the photos, they still couldn’t escape the Chinese netizens who looked at them. After careful comparison, they found that the 3D printers used by the US military were It is actually made in China.
The US military acknowledges that it has widely used Chinese 3D printers. The US military has acknowledged that it has widely used Chinese 3D printers.
As we all know, 3D printing technology is now in the ascendant. In many important defense fields, such as key components of fighter engines, special parts of strategic missiles and important components of spacecraft, 3D printers can now be manufactured in the fastest time. So, what about China's 3D printing technology? For example, like a drone, although China is a latecomer, it has become the fastest growing country. It is reported that after learning about the broad development prospects of 3D printing technology, China has invested heavily in development and has now become a world leader in this field.
The US stealth fighter will rely more on China's 3D technology in the future. The US stealth fighter will rely more on China's 3D technology in the future.
This time, it has been found that the US and British fighters are using a Chinese-made 3D printer, the "dreamer" type of high-precision dual-nozzle 3D printer. The US Air Force's 574th Military Aircraft Maintenance Squadron stationed at Hill Air Force Base in Utah used a Chinese-made 3D printer to print a titanium bracket for the F-22. The entire process took only 3 days, allowing the aircraft to be shortened. 60~70 days will be able to re-enter the battle; and the maintenance personnel on the US Navy's "Lupper" (LHD-1) amphibious assault ship printed a plastic buckle for the F-35B, successfully making a fighter within 1 day. Returning to the blue sky; the Royal Air Force's "Gale" GR4 attack aircraft began to use a large number of 3D printing including cockpit radio shields, landing gear guards and air intake bracket assemblies. It can be seen that, unconsciously, countries such as the United States and Britain have already begun to use the Chinese-made 3D printers to manufacture the key components required on the most advanced fighters.
歼-20 uses 3D printed titanium alloy frame 歼-20 using 3D printed titanium alloy frame
However, the US military will not allow the use of Chinese-made equipment directly in the military. For example, the American flag custom-made from China has been forcibly stopped by the US military. This time, the US military units using Chinese-made 3D printers deliberately blurred the trademarks of the 3D printers used in key parts, but they were still identified by netizens and were actually made in southern China. The strength of this Chinese company is rated as “China's desktop 3D printer recommended brand”, “China's 3D printing most innovative enterprise” and “China's 3D printing most influential international brand” in China's 3D printing brand evaluation and promotion activities. ", and won the second place in the "4th China Innovation and Entrepreneurship Competition", is the leading company in China's 3D printing.
It is expected that the US military will be inseparable from China's 3D when repairing its fighters. It is expected that the US military will be inseparable from China's 3D when repairing its fighters.
According to the analysis, 3D printing technology has been widely used in more advanced fields as the latest means of rapidly manufacturing complex special parts, including China's J-20 fighters, and has already begun to use this technology to manufacture many many key structural parts. This technology not only saves a lot of manufacturing costs, but most importantly, it can greatly reduce manufacturing time, which is very beneficial to quickly read combat aircraft in wartime and let it quickly return to combat. Today, China has been at the forefront of the world in this respect, just like drones, becoming China's new export fist. At the same time, in the future, the United States, Britain and other countries will certainly apply 3D technology in a large number of core areas of the military. Is China considering the inclusion of some related models in the US embargo? (Author's signature: Military Review Chen Guangwen)
F22被曝使用中国3D打印机所制部件 中国或对美禁售
F22被曝使用中国3D打印机所制部件 中国或对美禁售
410
3D打印的钛制金属零部件已首次安装在美军F-22与F-35B隐身战斗机上，而且从订货到交付至仓库仅用了3天时间，美国空军希望以此来降低战机的维护成本和维护时间。据美国“合众国际社”2日报道称，战机安装3D打印的零部件早已不是新鲜事，除美国外，英国和中国在该领域也有显著成果。而这次，尽管美军宣人员在发布照片时，对3D打印机的细节进行了模糊化处理，但还是没能逃过眼尖的中国网友，他们通过仔细对比后发现，美军此次使用的3D打印机，实际是中国制造的。
众所周知，3D打印技术如今方兴未艾，在很多十分重要的国防领域，比如战机发动机关键部件、战略导弹的一些特殊零件与宇宙飞船的重要组成部分，如今都可以使用3D打印机在最快时间内制造出来。那么，中国的3D打印技术怎么样呢？打个比方来说，就如同无人机一样，中国虽然是后来者，但却成为发展速度最快的国家。据悉，在了解到3D打印技术的广阔发展前景后，中国就投入了巨资进行开发，如今已成为这一领域的世界佼佼者。
这次已发现美国和英国的战机，都在使用中国制造的3D打印机——“梦想家”型的高精度双喷头3D打印机。驻扎在犹他州希尔空军基地的美空军第574军机维修中队，使用中国生产的3D打印机，为F-22战机打印了一个钛金属支架，全部过程只用了3天，从而让该战机可以缩短60~70天就能重新投入战斗；而美海军“黄蜂”号（LHD-1）两栖攻击舰上的维修人员，则为F-35B打印了一个塑料卡扣，成功让一架战机在1天内重返蓝天；而英国皇家空军的“狂风”GR4攻击机，造诣开始大批使用3D打印包括座舱无线电的防护罩、起落架防护装置以及进气道的支架组件等。由此可见，不知不觉间，美英等国早已在最先进的战机上开始使用中国制造的3D打印机制造所需关键部件。
不过，美军是不会允许直接在军中使用中国制造的装备的，比如早前从中国定制的美国国旗都被美军强制停止使用。这次也一样，使用中国制造的3D打印机的美军部队，刻意在关键部位模糊了所用3D打印机的商标，但还是被网友发现识别出来了，竟然是中国南方制造的。这家中国企业实力雄厚，在中国3D打印品牌评价推介活动中被评为“中国桌面级3D打印机推荐品牌”、“中国3D打印最具创新力企业”、“中国3D打印最具影响力国际品牌”，并获得“第四届中国创新创业大赛”第二名，是中国3D打印的领军企业。
分析认为，3D打印技术作为快速制造复杂特殊零部件的最新手段，已被广泛应用于更多的尖端领域，包括中国的歼-20战机，也早已开始利用这一技术制造很多很多关键结构件。这一技术不但可大幅节省制造成本，最重要的是可大幅减少制造时间，十分有利于战时快速修读作战飞机并让其迅速再次投入战斗。如今，在这方面中国已走在世界前列，就像无人机一样，成为中国新的出口拳头。同时，今后美英等国一定会在军中的一些核心领域大量应用3D技术，对此，中国是否考虑可将一些相关型号列入对美禁运之列？（作者署名：军评陈光文）
F22 is exposed to parts made in China's 3D printer. China or the US is banned.
F22 is exposed to parts made in China's 3D printer. China or the US is banned.
410
Nowadays, the US military stealth fighters cannot be separated from China. Nowadays, the US military stealth fighters cannot be separated from China.
3D printed titanium metal parts have been installed on the US F-22 and F-35B stealth fighters for the first time, and it took only three days from order to delivery to the warehouse. The US Air Force hopes to reduce the maintenance cost of the aircraft and Maintenance time. According to the US "United Press International" reported on the 2nd, the installation of 3D printed parts of the aircraft is not new. In addition to the United States, the United Kingdom and China have also made remarkable achievements in this field. This time, although the US military officers blurred the details of the 3D printer when they released the photos, they still couldn’t escape the Chinese netizens who looked at them. After careful comparison, they found that the 3D printers used by the US military were It is actually made in China.
The US military acknowledges that it has widely used Chinese 3D printers. The US military has acknowledged that it has widely used Chinese 3D printers.
As we all know, 3D printing technology is now in the ascendant. In many important defense fields, such as key components of fighter engines, special parts of strategic missiles and important components of spacecraft, 3D printers can now be manufactured in the fastest time. So, what about China's 3D printing technology? For example, like a drone, although China is a latecomer, it has become the fastest growing country. It is reported that after learning about the broad development prospects of 3D printing technology, China has invested heavily in development and has now become a world leader in this field.
The US stealth fighter will rely more on China's 3D technology in the future. The US stealth fighter will rely more on China's 3D technology in the future.
This time, it has been found that the US and British fighters are using a Chinese-made 3D printer, the "dreamer" type of high-precision dual-nozzle 3D printer. The US Air Force's 574th Military Aircraft Maintenance Squadron stationed at Hill Air Force Base in Utah used a Chinese-made 3D printer to print a titanium bracket for the F-22. The entire process took only 3 days, allowing the aircraft to be shortened. 60~70 days will be able to re-enter the battle; and the maintenance personnel on the US Navy's "Lupper" (LHD-1) amphibious assault ship printed a plastic buckle for the F-35B, successfully making a fighter within 1 day. Returning to the blue sky; the Royal Air Force's "Gale" GR4 attack aircraft began to use a large number of 3D printing including cockpit radio shields, landing gear guards and air intake bracket assemblies. It can be seen that, unconsciously, countries such as the United States and Britain have already begun to use the Chinese-made 3D printers to manufacture the key components required on the most advanced fighters.
歼-20 uses 3D printed titanium alloy frame 歼-20 using 3D printed titanium alloy frame
However, the US military will not allow the use of Chinese-made equipment directly in the military. For example, the American flag custom-made from China has been forcibly stopped by the US military. This time, the US military units using Chinese-made 3D printers deliberately blurred the trademarks of the 3D printers used in key parts, but they were still identified by netizens and were actually made in southern China. The strength of this Chinese company is rated as “China's desktop 3D printer recommended brand”, “China's 3D printing most innovative enterprise” and “China's 3D printing most influential international brand” in China's 3D printing brand evaluation and promotion activities. ", and won the second place in the "4th China Innovation and Entrepreneurship Competition", is the leading company in China's 3D printing.
It is expected that the US military will be inseparable from China's 3D when repairing its fighters. It is expected that the US military will be inseparable from China's 3D when repairing its fighters.
According to the analysis, 3D printing technology has been widely used in more advanced fields as the latest means of rapidly manufacturing complex special parts, including China's J-20 fighters, and has already begun to use this technology to manufacture many many key structural parts. This technology not only saves a lot of manufacturing costs, but most importantly, it can greatly reduce manufacturing time, which is very beneficial to quickly read combat aircraft in wartime and let it quickly return to combat. Today, China has been at the forefront of the world in this respect, just like drones, becoming China's new export fist. At the same time, in the future, the United States, Britain and other countries will certainly apply 3D technology in a large number of core areas of the military. Is China considering the inclusion of some related models in the US embargo? (Author's signature: Military Review Chen Guangwen)
