• IP addresses are NOT logged in this forum so there's no point asking. Please note that this forum is full of homophobes, racists, lunatics, schizophrenics & absolute nut jobs with a smattering of geniuses, Chinese chauvinists, Moderate Muslims and last but not least a couple of "know-it-alls" constantly sprouting their dubious wisdom. If you believe that content generated by unsavory characters might cause you offense PLEASE LEAVE NOW! Sammyboy Admin and Staff are not responsible for your hurt feelings should you choose to read any of the content here.

    The OTHER forum is HERE so please stop asking.

Forum going to uplorry soon...

tobelightlight said:
You mean this?

tobelightlight

Thread 'Request for K Shanmugam to step down.'

https://www.change.org/p/call-for-the-resignation-of-shanmugam-and-hoong-wee-teck

Apparently I am not alone in my request for K Shanmugam to step down.

The current criminal trials have revealed many disturbing investigation practices. I made at least 5 police reports into the way the police has investigated me. And the police has NEVER interviewed me further for these allegations and when my lawyer Patrick Fernandez sent letter to the Police Commissioner, they just dismissed them and said they are without basis and meritless.

I have sued police officers over their handling of my...
Click to expand...
Yes
 
True Believer said:
@duluxe and his 'alliance' of lady boys

250px-Kathoey.jpg
Click to expand...

Anda tak tau malu?
 
It's only common for popular sites to be subjected to scams and extortions.

ULTIMATELY, it lays upon the RESPONSIBILITIES of the website host.....

While SBF collects no IP addresses, the webhost DO have information on such, more so on these recent attacks after demanding money from boss Sam after obtaining his password and name on his website host, which FAILED.

While the moron hacker may attack SBF with DOS tactics, the website host WILL have information on WHO and WHERE those DOS attacks came from, even if those hackers will use every attempt to HIDE where they came from, as EVEN VPN cannot hide IP addresses from ghost/remote computers....

It is only a matter of RESPONSIBILITY from Boss Sam's webhost, TO IDENTIFY such IP addresses, and shut them down thru BLOCKING of their IP addresses, as such are their signatures such as by the VOLUME of attack that they had attacked, as while SBF is a popular site, it will not attract THAT MUCH volume to SBF servers.

Should SBF webhost failed to do so, then Boss Sam may reconsider another webhost, as it is only FREE MARKET at play....WITH RESP:ONSIBILITIES to Consumer....should the webhost think it is only just one customer and negligible, word of mouth TO OTHERS WILL END their FERRARI and IBIZA retirement dreams...
 
Forum is slow, like the content in the forum. We don’t deserve a hero like hwz. Speedy and require authentication.
 
rotiprata said:
so, wat's caused the bottleneck ?
Click to expand...

The PHP parameters set when the new server was being configured.


1. Primary Tweaks: PHP-FPM Pool Settings (Most Important)Edit your pool config (usually /etc/php/*/fpm/pool.d/www.conf or similar).Core parameters to adjust:
  • pm = static (recommended for performance on a dedicated forum server)
    Fixed number of always-ready workers. Avoids spawn/kill overhead. Great when you have enough RAM.

    linuxblog.io
  • pm = dynamic (alternative if RAM is tighter)
    More flexible but adds overhead.
  • pm.max_children — This is the #1 thing to increase
    How many simultaneous PHP scripts can run.
    Rough calculation: (Available RAM for PHP in MB) / (Average PHP process size in MB).
    Monitor with ps -ylC php-fpm --sort:rss or htop to see real usage per process (often 50-150+ MB with XenForo + OPcache).
    Start conservatively and raise while watching memory. Many XenForo users go 50–200+ depending on server size.

    talk.plesk.com
  • For dynamic:
    • pm.start_servers ≈ CPU cores × 2–4
    • pm.min_spare_servers ≈ CPU cores × 1–2
    • pm.max_spare_servers ≈ CPU cores × 4
  • pm.max_requests = 500–2000+ (or 0 for static if no memory leaks). Prevents memory bloat over time.
2. Other PHP Settings
  • memory_limit = 256M–512M (XenForo can need this for some operations).
  • max_execution_time = 30–60 (don't set too high).
  • Realpath cache: realpath_cache_size=4096K, realpath_cache_ttl=600.
 
Leongsam said:
The PHP parameters set when the new server was being configured.


1. Primary Tweaks: PHP-FPM Pool Settings (Most Important)Edit your pool config (usually /etc/php/*/fpm/pool.d/www.conf or similar).Core parameters to adjust:
  • pm = static (recommended for performance on a dedicated forum server)
    Fixed number of always-ready workers. Avoids spawn/kill overhead. Great when you have enough RAM.

    linuxblog.io
  • pm = dynamic (alternative if RAM is tighter)
    More flexible but adds overhead.
  • pm.max_children — This is the #1 thing to increase
    How many simultaneous PHP scripts can run.
    Rough calculation: (Available RAM for PHP in MB) / (Average PHP process size in MB).
    Monitor with ps -ylC php-fpm --sort:rss or htop to see real usage per process (often 50-150+ MB with XenForo + OPcache).
    Start conservatively and raise while watching memory. Many XenForo users go 50–200+ depending on server size.

    talk.plesk.com
  • For dynamic:
    • pm.start_servers ≈ CPU cores × 2–4
    • pm.min_spare_servers ≈ CPU cores × 1–2
    • pm.max_spare_servers ≈ CPU cores × 4
  • pm.max_requests = 500–2000+ (or 0 for static if no memory leaks). Prevents memory bloat over time.
2. Other PHP Settings
  • memory_limit = 256M–512M (XenForo can need this for some operations).
  • max_execution_time = 30–60 (don't set too high).
  • Realpath cache: realpath_cache_size=4096K, realpath_cache_ttl=600.
Click to expand...
sammy.com is not the only 1... lately several companies here oso having issues with their websites.. don't know wtf is going on...
 
Leongsam said:
The PHP parameters set when the new server was being configured.


1. Primary Tweaks: PHP-FPM Pool Settings (Most Important)Edit your pool config (usually /etc/php/*/fpm/pool.d/www.conf or similar).Core parameters to adjust:
  • pm = static (recommended for performance on a dedicated forum server)
    Fixed number of always-ready workers. Avoids spawn/kill overhead. Great when you have enough RAM.

    linuxblog.io
  • pm = dynamic (alternative if RAM is tighter)
    More flexible but adds overhead.
  • pm.max_children — This is the #1 thing to increase
    How many simultaneous PHP scripts can run.
    Rough calculation: (Available RAM for PHP in MB) / (Average PHP process size in MB).
    Monitor with ps -ylC php-fpm --sort:rss or htop to see real usage per process (often 50-150+ MB with XenForo + OPcache).
    Start conservatively and raise while watching memory. Many XenForo users go 50–200+ depending on server size.

    talk.plesk.com
  • For dynamic:
    • pm.start_servers ≈ CPU cores × 2–4
    • pm.min_spare_servers ≈ CPU cores × 1–2
    • pm.max_spare_servers ≈ CPU cores × 4
  • pm.max_requests = 500–2000+ (or 0 for static if no memory leaks). Prevents memory bloat over time.
2. Other PHP Settings
  • memory_limit = 256M–512M (XenForo can need this for some operations).
  • max_execution_time = 30–60 (don't set too high).
  • Realpath cache: realpath_cache_size=4096K, realpath_cache_ttl=600.
Click to expand...
so it wasn't some ddos attack by PAP IB claimed by a samster here. LOL.
 
Leongsam said:
The PHP parameters set when the new server was being configured.


1. Primary Tweaks: PHP-FPM Pool Settings (Most Important)Edit your pool config (usually /etc/php/*/fpm/pool.d/www.conf or similar).Core parameters to adjust:
  • pm = static (recommended for performance on a dedicated forum server)
    Fixed number of always-ready workers. Avoids spawn/kill overhead. Great when you have enough RAM.

    linuxblog.io
  • pm = dynamic (alternative if RAM is tighter)
    More flexible but adds overhead.
  • pm.max_children — This is the #1 thing to increase
    How many simultaneous PHP scripts can run.
    Rough calculation: (Available RAM for PHP in MB) / (Average PHP process size in MB).
    Monitor with ps -ylC php-fpm --sort:rss or htop to see real usage per process (often 50-150+ MB with XenForo + OPcache).
    Start conservatively and raise while watching memory. Many XenForo users go 50–200+ depending on server size.

    talk.plesk.com
  • For dynamic:
    • pm.start_servers ≈ CPU cores × 2–4
    • pm.min_spare_servers ≈ CPU cores × 1–2
    • pm.max_spare_servers ≈ CPU cores × 4
  • pm.max_requests = 500–2000+ (or 0 for static if no memory leaks). Prevents memory bloat over time.
2. Other PHP Settings
  • memory_limit = 256M–512M (XenForo can need this for some operations).
  • max_execution_time = 30–60 (don't set too high).
  • Realpath cache: realpath_cache_size=4096K, realpath_cache_ttl=600.
Click to expand...
Thanks boss.
 
Leongsam said:
The PHP parameters set when the new server was being configured.


1. Primary Tweaks: PHP-FPM Pool Settings (Most Important)Edit your pool config (usually /etc/php/*/fpm/pool.d/www.conf or similar).Core parameters to adjust:
  • pm = static (recommended for performance on a dedicated forum server)
    Fixed number of always-ready workers. Avoids spawn/kill overhead. Great when you have enough RAM.

    linuxblog.io
  • pm = dynamic (alternative if RAM is tighter)
    More flexible but adds overhead.
  • pm.max_children — This is the #1 thing to increase
    How many simultaneous PHP scripts can run.
    Rough calculation: (Available RAM for PHP in MB) / (Average PHP process size in MB).
    Monitor with ps -ylC php-fpm --sort:rss or htop to see real usage per process (often 50-150+ MB with XenForo + OPcache).
    Start conservatively and raise while watching memory. Many XenForo users go 50–200+ depending on server size.

    talk.plesk.com
  • For dynamic:
    • pm.start_servers ≈ CPU cores × 2–4
    • pm.min_spare_servers ≈ CPU cores × 1–2
    • pm.max_spare_servers ≈ CPU cores × 4
  • pm.max_requests = 500–2000+ (or 0 for static if no memory leaks). Prevents memory bloat over time.
2. Other PHP Settings
  • memory_limit = 256M–512M (XenForo can need this for some operations).
  • max_execution_time = 30–60 (don't set too high).
  • Realpath cache: realpath_cache_size=4096K, realpath_cache_ttl=600.
Click to expand...


Thanks Boss Sam, for sharing this tech info which will help others facing terroristic and criminal attacks or just innocent high viewership demand upon civilization ÀND CRITICALLY the COUNTER MEASURES nèeded....

Evidences and wise moral judgements will be needed, to serve innocents and deal with HARMFUL single minded stubborn wilfully ignorant beasts....

We Humankind will NEVER live on knees to sub-humans such as terrorists, criminals and the insane in Human skin...

Such beasts and self serving animals may think they are smart, using and ABUSING this site that Boss Sam had ALTRUISTICALLY created in the Human Right to freedom of speech, but those Animals pathetic attempts by swaying minds to their personal greed or stubborn believes and when failed, resort to drastic actions, but they are only few COMPARED to the COMBINED intelligence of 7 Billion + HUMANKIND...
 
Last edited:
You must log in or register to reply here.

Similar threads

Nut
Sammyboy forum spoil liao
Replies
0
Views
178
Nut
Nut
B
Sinkieland great place to do business!
Replies
1
Views
148
Leongsam
Leongsam
P
Chitchat Famous Cina Scientist Old Fart 楊振寧 Uplorry!
Replies
6
Views
655
Pinkieslut
P
Nut
Foodpanda Redditer: Got my first loan shark harassment order yesterday.
Replies
0
Views
99
Nut
Nut
Les grossman
Pasir Ris Hawker Centre going to uplorry soon? Many stalls seen closed for past four months
Replies
11
Views
2K
Willamshakespear
W
Back
Top